All our Cladding products are suitable for use inside or outside.


All our stone cladding cladding products can be used on New Builds, Renovations, cosmetic update around the home, suitable for bathrooms, kitchens, fireplaces, feature walls , and garden projects.


Have many advantages over traditional walling and cut stone as light in weight and easier to use.


Can be used with someone who has very little experience of DIY so long as you have the basis of tiling you can use our claddings. 


Our range of cladding systems and colours is most probably one of the largest in the UK. 

Both Natural and Manufactured stone cladding have their place both are mainly used as a decretive finish to external or internal horizontal walls and surfaces. However saying this the new Eazyclad thin slate veneer is only about 2mm in thickness and can be used on the vertical  surface so is ideal for covering a ceiling or overhang. 
Stone cladding can be produced using either natural stone or manufactured stone and can go from a thickness of 2mm up to 100mm depending on requirements .

Natural stone cladding is made from Real stone cut or split to a specific consistent thickness and can be set on to a backing or left as it is 

Manufactured Stone Cladding veneers are mainly used for decorative purposes and made of a light weight cement based product and produced to replicate the look of natural stone .

 Here are some pictures kindly sent in by Mark Roberts who has recently purchased the block slate  panel system from us. Mark has said that he done the work himself cutting out many labouring costs.  So long as you have a good idea of Basic DIY you will find that all of our stone cladding systems are very easy to use and give a great addition to any property you may consider updating either now or in the future . 

what are Calibrated Indian sandstone flagstone paving, Basically they are the same stone as the Non calibrated but are generally much thinner on average 22mm by having the back of the flagstone shaved off to give a consistent    thickness through out the pack . They are far easier to use and most landscapers will use nothing but calibrated stone nowadays. They came about as shipping costs increased and importers wanted and needed to get more stone in the container to keep costs down. Where as you can get 21 sq mts in a crate of calibrated you are looking at about 14-15 sq mts of non calibrated stone in a crate. Also the landscapers  like them as they do exactly the same job as the thicker slabs but are far easier to move and can be done a lot of the time with 1 person. They do work out more expensive that the Non Calibrated ones but you should be able to negotiate a far better laying cost as they can be put down much quicker saving time .

We are pleased to say that we are very pleased with the way things are progressing with Eazyclad brick slips. They are eco friendly and can be used inside or out and will enhance any area you may be thinking of having a make over with also are suitable for new builds.
 Prices do vary in cost but we are able to get a basic range out for £25.00 plus vat per square metre.  You make think that against conventional bricks this may seem expensive but many many people find that they save money in the long run as build time is reduced, labour cost are far less and transport costs are much cheaper. A lot of Developers have also found that a great saving can be made on the foundation stage of the building as the slips are light weight. 

Ideal for inside or outside projects 

Range of 8 natural stone cladding options with easy to use quoins

Creates a fantastic wall or fireplace at very little cost

These fantastic looking Natural stone walling panels are strips of stone that are then attached to each other  to form a easy to use stone cladding panel system. The Corner stones are very simple and look very effective as we have had the ends dressed to give a natural finished look.
Easy to use with very little DIY experience as it is just like tiling and best of all is the fantastic prices that we bring this to you over our competitors. We are direct importers of this product and are available to pass on the saving to you. 

We sell a product called Easy Joint which is used for Jointing Sandstone paving or cobble stone setts. If you can use a broom then you can save time money and effort with our easy lay jointing Compound.  We even offer it a massive discounted price £22.50 +vat instead of £30.00 +vat if you purchase it at the same time as the stone from us. 1 pot will cover an area of 7sq mts on calibrated 22mm stone.

Whilst it is slightly more expensive that the old fashion method of mixing sand and cement mortars but considerable savings can be made when you take time and effort into account. It is also very good at stopping weeds and algae growth and even hold if you use a power wash regularly.

for more information follow link  http://www.herefordbrickandstone.com/jointing-compounds.html 

Calibrated Slate and sandstone paving is a way of finishing off Flagstones and Slabs of various thickness into a standard thickness (rather like a tile) in our case 20mm or 22mm. This is mainly produced with stones from India and China .
         Theses can be used and laid on a level screed bed rather than the harder to use un-calibrated stone paving. The calibration takes place on the under side of the stone and generally you will see lines running on the underside where the machinery has been used to level it off.
          Whilst Calibrated natural stone is more expensive than standard  non calibrated most landscapers quote less for laying so you should make them aware that you are going to purchase Calibrated and if you are using it yourself you will find it much easier to use.

Reasons to Use Calibrated Stone Paving
Easier to lay . No variance in thickness. Lighter to pick up and carry, Cheaper Costs for having laid. More cost effective when it comes to delivery costs  (up to 22sq mts per tonne)

Your Stone flags may have been Spot Bedded also known as Dab laying and is a way some people use when laying flagstone paving, It consists  generally of 5  to 6 spots of  cement  placed one on each corner and maybe a couple in the  centre and the flagstone is layed on top .

The cavity below the slab can allow surface water to build up and subsidence or instability to occur.

The gap below could make them more fragile and break  when put under any stress or weight.

Damp Patches may arise as the cement can act as a wick. and if using sea sand can stain the stone as in picture.

Small creatures such as ants mice and insects like to burrow and can cause a lot of movement under the flagstone.

It may be cheaper to have them layed on a full soli 

1.  The gap can allow surface water to accumulate and lead to subsidence or instability.
2. The gap below could make them more fragile and crack when under a load. 
3. Damp patches may arise as the cement can act as a wick 
4. Ants and small animals can get underneath and tunnel and make ground underneath unstable.
5. It is not always cheaper to than having a solid bed layed 
6. Advice is to just check with the person laying the flagstones which method he is going to use. 

  Advice is to just check with the person laying the flagstones which method he is going to use. 
/