Classic Slate Stoneclad (Z shaped stone cladding)
Classic Z Shaped Slate wall cladding is one of our most popular cladding profiles for building facades and facing of external walls, although it is also very popular with interior designers who want to add a natural stone appearance to walls and fireplaces.
Stone comes in a box which covers just over a 1/3 of a square metre and has the following size of panels and three boxes are equivalent to 1.08 of a square metre.
Stone comes in a box which covers just over a 1/3 of a square metre and has the following size of panels and three boxes are equivalent to 1.08 of a square metre.
- 2 panels 600mm x 200mm x 45-50mm
- 1 panel 400mm x 200mm x 45-50mm
- 1 panel 200mm x 200mm x 45-50mm
Modern building practices work hand in hand Stoneclad natural stone wall cladding Panel system. whist it is best suited to cover convention brick and block work it can be used on a multitude of surfaces.
Fitting Of Panels Fitting should commence from the lowest row, fitting the Stoneclad pieces together. On fixing the second row, the joints should be alternated with those in the first row to avoid them being visible. These panels may be applied over any masonry surface, concrete block, brick, cement ect. If the support structure is painted or in the case of any other base which does not have the necessary adherence this should be scrapped or chipped away in order to prevent panels from becoming loose.
In general, a simple cement-based adhesive for exterior use, with a high level of flexibility, minimum vertical movement and resistant to prolonged exposure can be used. Eazy Clad recommends the approved adhesive for fixing. It is important to ensure that the can withstand the weight of the panel. For exteriors, and heights above two metres, it is recommended that the panels are fixed using the integrated clip.
In general, a simple cement-based adhesive for exterior use, with a high level of flexibility, minimum vertical movement and resistant to prolonged exposure can be used. Eazy Clad recommends the approved adhesive for fixing. It is important to ensure that the can withstand the weight of the panel. For exteriors, and heights above two metres, it is recommended that the panels are fixed using the integrated clip.